How Is The Electric Control Valve Produced And Installed

How are the electric control valves produced? Electric control valve feedback: The motor runs through gears, and the three-connected sliding rheostat outputs the valve positioning signal, in addition to the three-wire limit signal. The reason why products are widely used is that after years of development and driven by technology, they have more and more satisfied people's needs, especially the company's products, whose performance has also been continuously improved. The following is an introduction to the relevant knowledge of the product.

How should the electric control valve be installed?

The electric control valve is very suitable to be installed with the upper end of the working piston at the lower part of the horizontal pipeline. The temperature sensor can be installed in any position, and the entire length must be immersed in the controlled medium.

Electric control valves generally include a driver, which accepts driver signals (0-10V or 4-20MA) to control the valve for adjustment. It can also form an intelligent network control system according to control needs to optimize control and realize remote monitoring.